capture card frame grabber video processor datapath pixell blackmagic black magic video wall porcessor wall controller data wall processor data wall controller magewell epiphan Untitled Page ">
Copyright 1999-2020
925-683-5814
Pixell worlds largest Datapath distributor. Pixell sells to dealers, resellers, system integrators and end users. Pixell rents x4 units. Buy it now here. Capture Cards, Frame Grabber, Video Processors rental dealer purchase overnight
USD $395.00 Available
VisionLC-HD
VisionLC-HD2
VisionLC-SDI
USD $569.00 Available
USD $425.00 Available

    Single HDMI capture channel
    Up to 297 Mpixel/s clock capturing up to 4096x2160p @ 30fps
    800 MB/s DMA bandwidth
    High performance up and down scaling
    Colour space conversion to support output formats
    PCI Express Gen 1 x 4 low profile
    Datapath unified Windows® and Linux® driver support

    Capture Channel 1
        HDMI capture channel
        297Mpixel/s maximum TMDS clock frequency
        4096x2160 @ 30Hz 4:4:4
    Capture Channel 2
        HDMI capture channel
        165MHz maximum TMDS clock frequency
        1920x1080p @ 60Hz 4:4:4
    1.6GB/s total DMA bandwidth
    High performance up and down scaling
    Colour space conversion to support any output format
    PCI Express Gen 2 x 4 low profile
    Datapath unified Windows® and Linux® driver support

    Single SDI capture channel
    SD/ HD/ 3G at 60 fps
    800 MB/s DMA bandwidth
    High performance up and down scaling
    Colour space conversion to any output formats
    PCI Express Gen 1x4 low profile
    Datapath unified Windows® and Linux® driver support
Features:
Features:
Features:
Single channel "LiveStream:Capture" card

Discreet video capture is now the mainstay of many small form factor appliances being used in markets such as lecture capture, distance learning and medical environments. Datapath's VisionLC-SDI provides tri-band SDI capture for use within such applications. Datapath's LiveStream:Capture architecture allows captures video to be processed and delivered in real time to a processor or graphics card.

This VisionLC-SDI supports on board colour space conversion and scaling, providing the ability to efficiently transfer the video signal in a suitable format for rendering or encoding applications. The VisionLC-SDI natively supports 32, 24, 16 and 12 bit YUV and RGB formats.
Multi-application capture

The VisionLC-SDI capture card has been designed for use within application models such as:

A few example applications:

    Medical environments
    Simulation systems
    Live events
    PC and gaming console capture
    Lecture and presentation capture
    RealTime streaming

It is also possible to put more than a single card into a system for multiple capture channels.

Due to the nature of the LiveStream:Capture architecture, the VisionLC-SDI s not supported for wall controller applications that depend on Datapath's MultiStream technology.

Video streaming

Built upon the Microsoft AV stream model, VisionLC-SDI inputs can be accessed and enumerated in any DirectShow or Media Foundation supported application. A video for Linux (V4L) driver package is also available to download.

Tested applications includes:

    Microsoft Media Encoder
    VLC
    Telestream WireCast
    vMix
    Opencast Matterhorn
    VidBlaster
    OBS Project
    Adobe Flash Media Encoder
    Dataton Watchout
Specification of the VisionLC-SDI Video Capture Card:

Board Format
PCIe Gen 1 x 4 plug-in card
Dimensions
103mm x 64mm (l x h)
Connector
SDI-BNC
Maximum Capture Resolution
SD/ HD/ 3G at 60 fps
Transfer Rate
800MB maximum DMA transfer rate

Input Mode Detection:
Supports SMPTE-352 Payload identifiers
Hardware Colour Space Conversion 30 / 24 / 16 bit RGB (4:4:4)
16 bit YUV (4:2:2)
12 bit YUV, NV12, YV12 (4:2:0)
Audio Support
Stereo pair PCM audio via each SDI channel at 16 bits in depth, sampling options include 44.1/ 48/ 96 kHz
Video Modes SD-SDI (480i/ 576i) ST-259, EBU 3276
HD-SDI (up to 1080i) ST-260, 274, 296
3G-SDI (up to 1080p) ST-274, 296
2k Digital Cinema modes ST 2048-2
Low Latency
LiveStream:Capture
Single frame time plus DMA transfer of final line
Operating Sysytem Support
Linux,
Windows® XP, Windows Vista, Windows Server 2003, Windows Server 2008, Windows 7, Windows 8/8.1 and Windows 10
Power Requirements
Max current at 1A at 3.3V
Max power ≈ 3.3W
Operating Temperature
0 to 35 deg C/ 32 to 96 deg F
Storage Temperature -20 to 70 deg C (-4 to 158 deg F)
Relative Humidity 5% to 90% non-condensing
Analog audio not supported
Warranty 3 years

We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.
Dual channel "LiveStream:Capture" card

Discreet video capture is now the mainstay of many small form factor appliances being used in markets such as lecture capture, distance learning and medical environments. Datapath's VisionLC-HD2 provides a dual channel, high definition HDMI capture card for use within such environments.

Datapath's LiveStream:Capture architecture allows captured video to be processed in real time to a processor or graphics card. The VisionLC-HD2 supports on board colour space conversion and scaling, providing the ability to efficiently transfer the video signal making it suitable for rendering or encoding applications.

The VisionLC-HD2 natively supports 32, 24, 16 and 22 bit YUV ad RGB formats.

Multi-application capture

The VisionLC-HD2 capture card has been designed for use within application models such as:

    Medical environments
    Simulation systems
    Live events
    PC and gaming console capture
    Lecture and presentation capture
    Real time streaming

It is also possible to put more than a single card into a system for multiple capture channels.

Due to the nature of the LiveStream:Capture architecture, the VisionLC-HD2 is not supported for wall controller applications that depend on Datapath's MultiStream technology.

Video Streaming

Built upon the Microsoft AV stream model, VisionLC-HD2 inputs can be accessed and enumerated in any DirectShow or Media Foundation supported application. A video for Linux (V4L) driver package is also available to download.

Tested applications includes:

    Microsoft Media Encoder
    VLC
    Telestream WireCast
    vMix
    Opencast Matterhorn
    VidBlaster
    OBS Project
    Adobe Flash Media Encoder
    Dataton Watchout
Specification of the VisionLC-HD2 Video Capture Card:

Board Format
PCIe Gen 2 x 4 plug-in card
Dimensions
103mm x 64mm (l x h)
Connectors
2 x HDMI
Pixel Rate Channel 1 - 297 Mpixel/s
Channel 2 - 165 Mpixel/s
Max Capture Resolution Channel 1 - 4096x2160p @ 30Hz
Channel 2 - 1920x1080p @ 60Hz
Transfer Rate
1.6GB maximum DMA transfer rate
Hardware Colour Space Conversion 30 / 24 / 16 bit RGB (4:4:4)
16 bit YUV (4:2:2)
12 bit YUV, NV12, YV12 (4:2:0)
Audio Support
Stereo pair PCM audio via each HDMI channel at 16 bits in depth, sampling options include 44.1/ 48/ 96 kHz
Low Latency
LiveStream:Capture
Single frame time plus DMA transfer of final line
Operating Sysytem Support
Linux.
Windows® XP, Windows Vista, Windows Server 2003, Windows Server 2008, Windows 7, Windows 8/8.1 and Windows 10
Power Requirements
Max current at 1.5A at 3.3V
Max power ≈ 5W
Operating Temperature
0 to 35 deg C/ 32 to 96 deg F
Storage Temperature -20 to 70 deg C (-4 to 158 deg F)
Relative Humidity 5% to 90% non-condensing
Analog audio not supported
Warranty 3 years

We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.
Single channel "LiveStream:Capture" card

Discreet video capture is now the mainstay of many small form factor appliances being uses in markets such as lecture capture, distance learning and medical environments. Datapath's VisionLC-HD provides HDMI capture for use within such applications.

Datapath's LiveStream:Capture architecture allows captured video to be processed and delivered in real time to a processor or graphics card. The VisionLC-HD supports on board colour space conversion and scaling, providing the ability to efficiently transfer the video signal in a suitable format for rendering or encoding applications. The VisionLC-HD natively supports 32, 24, 16 and 12 bit YUV and RGB formats.



Multi-application capture

The VisionLC-HD capture card has been designed for use within application models such as:

    Medical environments
    Simulation systems
    Live events
    PC and gaming console capture
    Lecture and presentation capture
    Real time streaming

It is also possible to put more than a single card into a system for multiple capture channels.

Due to the nature of the LiveStream:Capture architecture, the VisionLC-HD is not supported for wall controller applications that depend on Datapath's MultiStream technology.>

Video streaming

Built upon the Microsoft AV stream model, VisionLC-HD inputs can be accessed and enumerated in any DirectShow or Media Foundation supported application. A video for Linux (V4L) driver package is also available to download.

Tested applications includes:

    Microsoft Media Encoder
    VLC
    Telestream WireCast
    vMix
    Opencast Matterhorn
    VidBlaster
    OBS Project
    Adobe Flash Media Encoder
    Dataton Watchout
Specification of the VisionLC-HD Video Capture Card:

Board Format
PCIe Gen 1 x 4 plug-in card
Dimensions
103mm x 64mm (l x h)
Connector
HDMI
Pixel Rate 297 Mpixel/s
Maximum Capture Resolution
4096x2160p @ 30Hz
Transfer Rate
800MB maximum DMA transfer rate
Hardware Colour Space Conversion 30 / 24 / 16 bit RGB (4:4:4)
16 bit YUV (4:2:2)
12 bit YUV, NV12, YV12 (4:2:0)
Audio Support
Stereo pair PCM audio via each HDMI channel at 16 bits in depth, sampling options include 44.1/ 48/ 96 kHz
Low Latency
LiveStream:Capture
Single frame time plus DMA transfer of final line
Operating Sysytem Support
Linux,
Windows® XP, Windows Vista, Windows Server 2003, Windows Server 2008, Windows 7, Windows 8/8.1 and Windows 10
Power Requirements
Max current at 1A at 3.3V
Max power ≈ 3.3W
Operating Temperature
0 to 35 deg C/ 32 to 96 deg F
Storage Temperature -20 to 70 deg C (-4 to 158 deg F)
Relative Humidity 5% to 90% non-condensing
Analog audio not supported
Warranty 3 years

We are continuously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.