A capture card with 2 channels of HD DVI video and an extra composite video input all operating simultaneously and independently; with full analog and digital audio support.
PRODUCT OVERVIEW
The VisionAV-HD is a four lane PCI Express capture card with three video capture inputs - two supporting HD capture and a third supporting SD composite video, these three independent video channels can be captured simultaneously. The VisionAV-HD also adds multiple channels of audio capture, which can be synchronised in software using time stamping with all video capture channels.
This half length full height card features a full mechanical sixteen lane connector with notches which will enable it to fit 4, 8 and 16 lane motherboard connectors.
The VisionAV-HD also adds embedded audio capture from the HDMI signal, which can be sychronised with the respective video channel. This video capture card provides balanced and unbalanced analog audio capture, through an optional audio module (the Datapath AM2)
This provides a single flexible card solution for areas such as medical, lecture capture, web casting and video conferencing.
Datapath Vision AV-HD Capture Card
Four lane PCIe lane bus, Net 1.6 GB/s total capture bandwidth
Triple channel PCI Express capture card - HD DVI-I, SD, SDI
Direct DMA to graphics memory of third party graphics cards
SPECIFICATIONS:
Board format PCI Express x4 half size plug-in card, 110mm x 170mm
Connectors (main board) 2 x DVI-I, 1 x RCA (female)
HDMI capture
Supports HDMI 1.3 to 225 MHz (inlcuding deep colour modes) For HDCP support, contact the Sales department for more information
HDMI audio can be selected as source for audio streaming
Incorporates TMDS equaliser to support up to 20m cables
DVI capture
Supports DVI 1.0 RGB 24bit capture to 165MHz
Incorporates TMDS equaliser to support up to 20m cables
VGA/ YPbPr Capture
Triple ADCs sampling up to 170Msps. Full 4:4:4 sampling, 8bits per colour
5-wire, 4-wire or sync-on-green signal format
Composite video capture CCIR601 sampling, PAL, NTSC, SECAM formats automatically detected
Audio capture
Stereo Line-In/ Stereo balanced inputs with programmable gain (+/-12dB)
16bit sampling at 44.1/ 48/ 96kHz
Analogue stereo line-out for direct passthrough of selected input at up to 64kHz sampling, sourced from Analog input or HDMI channel
Video capture memory
256MB high bandwidth frame buffer supports triple buffering of HD and SD video
Local storage of complex scatter-gather tables for DMA engine (elimintates read overhead)
Video processing
Polyphase FIR scaling engine (7x5) for hardware downscaling and upscaling
Colour space conversion allows captured data to be transferred in any format:
RGB 16 bit (5-5-5, 5-6-5), 24 bit (8-8-8) or 32 (8-8-8 alpha)
YUV 16 bit (4:2:2)
Mono: 8 bit
DMA engine
Direct DMA to physical or virtual memory buffers with full scatter-gather support
DMA bandwidth: up to 800MB/s
16 independent DMA streams: Any mix of HD and SD sources, colour space, cropping and scaling parameters
Operating system support Windows XP, Windows Server 2003, Windows Vista, Windows Server 2008, Windows Server 2012, Windows 7, Windows 8 and Linux support (NOTE: Check Linux specific features with Sales)
Power requirements
Max current at 12V - 1A
Max current at 3.3V - 1A
Thermal dissipation - 15.5 W
Operating temperature 0 to 35 °C (32 to 96°F)
Storage temperature -20 to 70 °C (-4 to 158 °F)
Relative humidity 5% to 90% non-condensing
Warranty 3 years
We are continously developing the technology used within our product ranges delivering outstanding innovative solutions, therefore the specification may change from time to time.


Scroll Down For More
USD $1995.00 In-Stock
Board Model 168 168B 168C
Free Freight !